CRITICAL INFRASTRUCTURE
Thermal Radar™ for Critical Infrastructure Security
Critical infrastructure facilities face some of the most demanding perimeter security challenges of any industry. Electrical substations, power generation facilities, water treatment plants, dams, waterways, telecommunications sites, transportation infrastructure, and energy assets often span large geographic areas while operating continuously around the clock.
​
Protecting these facilities often requires more than traditional security cameras. Conventional visible-light cameras depend on adequate lighting and can be challenged by darkness, shadows, glare, and other environmental conditions. Traditional fixed thermal cameras improve nighttime visibility but frequently require multiple devices, additional infrastructure, and significant maintenance to achieve broad-area coverage.
​
Thermal Radar™ was specifically designed to address these challenges through patented 360° thermal perimeter monitoring technology that continuously surveys the entire surrounding environment from a single system. Unlike traditional visible-light cameras that depend on lighting conditions or fixed thermal cameras that only monitor a limited field of view, Thermal Radar™ delivers continuous wide-area thermal surveillance across large outdoor environments using its patented rotating architecture.
​
By providing uninterrupted thermal perimeter monitoring, Thermal Radar™ helps security teams detect people, vehicles, and other potential threats earlier, often before they reach critical assets or protected areas. The system continuously generates actionable situational awareness across the perimeter, allowing operators to identify, assess, and respond to security events more efficiently.
​
A key advantage of Thermal Radar™ is its ability to support an inside-out security approach. Rather than focusing only on a fence line or boundary, Thermal Radar™ can simultaneously monitor areas outside the perimeter, at the perimeter, and inside the protected area. This layered visibility helps security personnel identify approaching threats earlier, track activity as it develops, and maintain awareness throughout the protected environment.
​
For critical infrastructure operators responsible for protecting large and complex facilities, Thermal Radar™ provides a unique combination of wide-area security, early threat detection, continuous perimeter surveillance, inside-out monitoring, and reduced infrastructure requirements that traditional camera-based security deployments often struggle to achieve.
Wide-Area Perimeter Security for Critical Infrastructure
One of the biggest security challenges facing critical infrastructure operators is protecting large outdoor areas efficiently.
​
Traditional perimeter security deployments often require numerous visible-light cameras, multiple thermal cameras, extensive network infrastructure, trenching, poles, power distribution, and ongoing maintenance.
​
Thermal Radar™ utilizes a patented rotating thermal architecture that continuously surveys the entire surrounding environment in 360 degrees.
​
Rather than monitoring only a fixed field of view, Thermal Radar™ provides continuous perimeter surveillance around the protected asset, helping organizations monitor:
​
-
Electrical substations
-
Power plants
-
Water treatment facilities
-
Dams and waterways
-
Renewable energy sites
-
Telecommunications infrastructure
-
Transportation facilities
-
Fuel storage locations
-
Pipeline infrastructure
-
Industrial facilities
-
Data centers
-
Utility assets
This approach can significantly reduce the number of devices required to achieve comprehensive perimeter security while simplifying deployment and reducing infrastructure requirements.
Thermal Intrusion Detection for Early Threat Detection
Critical infrastructure security depends heavily on early warning.
​
The sooner a potential threat is detected, the more time security personnel have to assess, verify, and respond appropriately.
​
Thermal Radar™ uses thermal imaging technology to detect heat signatures generated by people and vehicles approaching, crossing, or operating within protected areas.
​
Because thermal imaging detects heat rather than visible light, Thermal Radar™ can support intrusion detection during daytime, nighttime, and many challenging environmental conditions where traditional visible-light cameras may be less effective.
​
The system continuously scans for:
-
Unauthorized personnel
-
Vehicle incursions
-
Fence-line activity
-
Restricted-area access
-
Perimeter breaches
-
Suspicious movement patterns
-
Remote area intrusions
This capability helps create an effective early threat detection layer for critical infrastructure security programs.
Simultaneous Intrusion Detection and Early Fire Detection
Many critical infrastructure facilities face security risks and fire risks at the same time.
Electrical substations, battery energy storage systems (BESS), utility facilities, renewable energy sites, fuel storage locations, and industrial operations can all experience developing fire events that may threaten operations, equipment, and public safety.
​
Unlike traditional thermal camera deployments that are typically configured for either perimeter security or fire monitoring, Thermal Radar™ can simultaneously monitor for both intrusion activity and developing fire events using the same thermal surveillance platform.
​
Thermal Radar™ fireSENSE technology helps operators identify abnormal heat signatures and developing fire conditions across large outdoor areas while maintaining continuous perimeter monitoring.
​
This dual-purpose capability allows organizations to leverage a single thermal monitoring solution to support multiple operational objectives, including:
​
-
Thermal intrusion detection
-
Critical infrastructure security
-
Early fire detection
-
Situational awareness
-
Asset protection
-
Operational resilience
Integrated Detection, Verification, and Response
Once a potential threat is identified, security personnel must be able to quickly verify the activity, assess the level of risk, and determine the appropriate response. The faster this process occurs, the more time operators have to protect critical assets, personnel, and infrastructure.
​
Thermal Radar™ can operate as a standalone thermal perimeter monitoring platform, providing continuous 360° thermal surveillance, intrusion detection, and wide-area situational awareness across large outdoor environments. For organizations seeking additional visual verification capabilities, Thermal Radar™ can also integrate with Hydra™, Thermal Radar's advanced slew-to-cue integration technology.
​
When a qualified detection occurs, Hydra™ can automatically direct PTZ cameras toward the area of interest, allowing security personnel to rapidly verify and assess detected activity without manually searching large areas. This capability helps reduce response times while improving operator efficiency and overall situational awareness.
​
By combining early threat detection, continuous thermal perimeter monitoring, and automated visual assessment, organizations can move more efficiently from detection to verification and response. This layered approach helps security teams maintain awareness across large critical infrastructure facilities while supporting faster, more informed decision-making when potential security events occur.
Rapid Deployment Options for Remote Infrastructure
Many critical infrastructure assets are located in remote or difficult-to-access locations where traditional security deployments may be challenging. Electrical substations, renewable energy facilities, water infrastructure, telecommunications sites, pipeline assets, and other critical facilities often operate in areas where power, communications, or permanent security infrastructure may be limited.
​
Thermal Radar™ is available in multiple deployment configurations designed to support a wide variety of operational requirements, allowing organizations to implement thermal perimeter security across permanent, temporary, expanding, and remote sites.
​
These options include:
-
Fixed Thermal Radar™ installations
-
Mobile Sentry™ rapid-deployment solar-powered security trailers
-
Tower Sentry™ portable solar-powered surveillance towers
-
Banshee™ solar-powered assessment and targeted deterrence capabilities
Mobile Sentry™ and Tower Sentry™ provide rapidly deployable security platforms that can be positioned where perimeter protection is needed most. These solutions are well suited for temporary projects, construction zones, expanding facilities, emergency operations, remote utility assets, and locations where installing permanent security infrastructure may not be practical. Solar-powered configurations further expand deployment flexibility by supporting operation in areas with limited or unavailable grid power.
​
For critical infrastructure sites requiring an active response capability, Banshee™ can add targeted audio assessment, communication, and deterrence to the security solution. When potential intruders are detected, Banshee™ can project focused audio warnings toward the area of interest, helping operators engage individuals at a distance and discourage unauthorized activity before it progresses further into the protected environment.
​
Together, these deployment and response options allow organizations to extend continuous 360° thermal perimeter monitoring, wide-area surveillance, early threat detection, visual assessment, and targeted deterrence to locations where traditional security infrastructure may be limited or unavailable.
Why Critical Infrastructure Operators Choose Thermal Radar™
Critical infrastructure organizations require security technologies capable of providing continuous awareness across large outdoor environments.
​
Thermal Radar™ delivers a unique combination of:
-
Patented 360° thermal surveillance
-
Thermal intrusion detection
-
Wide-area perimeter security
-
Continuous perimeter monitoring
-
Early threat detection
-
Early fire detection
-
Hydra™ PTZ integration
-
Mobile and fixed deployment options
-
Reduced infrastructure requirements
-
Lower total system complexity
By helping operators detect intrusions and developing fire events earlier, Thermal Radar™ supports stronger critical infrastructure protection while improving operational awareness across some of the world's most important assets.
Our Value Proposition
Thermal Radar provides up to FIFTEEN fields of view from one camera which reduces the number of cameras needed at a facility. This generates significant savings and greatly mitigates infrastructure costs.
One Thermal Radar
One Thermal Radar replaces up to fifteen traditional security cameras, saving thousands of dollars while covering a much larger area. Up to 15x the coverage with fewer points of failure.
.png)
Installation Costs
Installation costs for traditional systems (including cable trenching) can cost thousands of dollars per site. The installation of a single Thermal Radar unit is a fraction of those costs. ($XX,XXX compared to $XXX,XXX)
.png)
VMS Costs
Video Management costs are significantly reduced by the number of licenses needed to manage your system. Specifically, one Thermal Radar unit with 15 fields of view requires one VMS license, rather than 15 licenses for the same views using individual cameras.
.png)
Maintenance Costs
Annual costs related to hardware maintenance and VMS software upgrades also require consideration for security installations. Replacing upwards of 15 individual cameras with one Thermal Radar will significantly reduce this yearly budgetary item.
End-User Savings
Over 70%
Frequently Asked Questions About Critical Infrastructure Perimeter Security
What is the best perimeter security technology for critical infrastructure?
The best perimeter security technology depends on the facility's size, risk profile, and operational requirements. Many critical infrastructure operators use thermal imaging because it can detect people and vehicles based on heat signatures rather than visible light. Thermal Radar™ enhances this approach with patented 360° thermal perimeter monitoring that continuously surveys the surrounding environment for potential threats.
​
Why is thermal imaging important for critical infrastructure security?
Thermal imaging allows security teams to detect heat signatures during daytime, nighttime, and many challenging environmental conditions. Unlike traditional visible-light cameras, thermal systems do not rely on ambient lighting. Thermal Radar™ uses thermal imaging technology to support continuous perimeter surveillance, early threat detection, and wide-area security monitoring, but does so 360°.
​
Can thermal imaging detect intruders before they reach critical assets?
Yes. Thermal imaging systems can detect people and vehicles approaching protected areas before they reach sensitive infrastructure. Thermal Radar™ is specifically designed to support early threat detection by continuously monitoring large outdoor areas and identifying potential intrusions as they develop.
​
Can Thermal Radar™ detect both intrusions and developing fire events?
Yes. Thermal Radar™ can simultaneously monitor for unauthorized activity and developing fire events using the same thermal surveillance platform. This capability is particularly valuable for electrical substations, utility facilities, renewable energy sites, industrial operations, and other critical infrastructure environments where both security and fire risks must be managed.
​
How does Thermal Radar™ differ from traditional thermal cameras?
Traditional thermal cameras typically monitor a fixed field of view and often require multiple devices to achieve broad-area coverage. Thermal Radar™ utilizes a patented rotating thermal architecture that continuously monitors 360 degrees around the installation point, helping organizations achieve wide-area thermal surveillance with fewer devices.
​
Can Thermal Radar™ integrate with existing security systems?
Yes. Thermal Radar™ can operate independently or integrate with existing security infrastructure. Additionally, through Hydra™, qualified thermal detections can automatically direct PTZ cameras toward areas of interest, helping security teams verify and assess threats more efficiently.
​
What types of critical infrastructure can benefit from Thermal Radar™?
Thermal Radar™ is used across a wide range of critical infrastructure applications, including electrical substations, power generation facilities, renewable energy sites, dams, waterways, water treatment plants, transportation facilities, telecommunications infrastructure, fuel storage sites, industrial operations, and data centers.
​
Can Thermal Radar™ be deployed in remote locations?
Yes. Thermal Radar™ supports fixed installations as well as Mobile Sentry™ trailers and Tower Sentry™ portable surveillance platforms. These deployment options help provide thermal perimeter security in remote and difficult-to-access environments where traditional infrastructure may be limited.
​
Does Thermal Radar™ replace visible-light cameras?
Not always. Thermal Radar™ can function as a standalone thermal detection solution, but many organizations also integrate visible-light PTZ cameras through Hydra™. Thermal Radar™ provides the thermal detection and tracking capabilities, while PTZ cameras can provide visual verification when needed.
​
How does Thermal Radar™ help reduce security infrastructure costs?
Because Thermal Radar™ continuously monitors 360 degrees from a single system, organizations can often reduce the number of devices, poles, trenching requirements, power runs, network connections, maintenance activities, and VMS licenses required to achieve comprehensive perimeter security coverage.
